|
Model: TW-1480
TW-1480 SPECIFICATIONS
MODEL | TW-1480 |
Travel | |
X axis (Longitudinal) | 1400 (55.1") |
Y axis (Cross) | 800 (31.5") |
Z axis (Vertical) | 700 (27.5") |
Spindle nose to table surface | 150-850 (6"-33.5") |
Spindle center to column surface | 820 (32.3") |
Table | |
Table dimension | 700 x 1500 (26" x 59") |
T-slots wide x; no. x pitch) | 18 (0.70") x 5 x 125 (4.92") |
Table height from the floor | 880 (34.6") |
Table load apacity | 2000kgs (4400lbs) |
Headstock | |
Spindle nose (BT/CAT/ISO) | 40 Taper / #50 Taper |
Spindle RPM (#40 Taper) | 8,000 / 10,000 (opt.) |
Spindle RPM (#50 Taper) | 6,000 / 8,000 (opt.) |
Feedrate | |
Rapid traverse for X, Y, Z axis | 15,000 mm./.min (600 ipm) |
Cutting feed for X, Y, Z axis | 1-10,000 mm./.min (0.04-400 ipm) |
Motors | |
Main motor #40 (cont./30min) | 11Kw / 15Kw |
Main motor #50 (cont./30min) | 15Kw / 18Kw |
AC servo motor for each axis | 3.5Kw-22 NM |
Coolant system | 580 W |
Lubrication system | 25 W |
Spindle chiller system | 850 W fpr spindle over 8,000 RPM |
Automatic tool changer | |
Magazine for armless type | 16 / 20 tools |
Magazine for arm type | 24 / 32 / 40 tools |
Max. tool diameter | #40 : 70 / 127 (3" /5") #50 : 125 / 180 (5"/7") |
Max. tool length | #40:300 (11.8") / #50:350 (13.8") |
Max. tool weight | #40: 7 kgs (15lbs) / #50: 15kgs (33lbs) |
Accuraccy | |
Positioning | ±0.005 mm / ±0.0002" |
Repeatability | ±0.005 mm / ±0.0002" |
General information | |
Air pressure | 5Kg / cm² over |
Machine weight | 12,000 kgs (26400lbs) |
Floor space (L x W x H) | 3,900 x 4,200 x 3,200 (154" x 165" x 126") |
CNC controller | Fanuc Oi / 31i, Meldas M70, Heidenhiem |
All specifications and designs are subject to change without notice.
Standard accessories | Optional accessories | |
Full enclosure gaurd | Automatic lubrication system | 10,000/12,000 rpm spindle with chiller |
Turning operation panel | Spindle air purge system | Coolant thru spindle function |
Rigid tapping | spindle air blow syste | ZF 2 stages gear head with oil chiller |
MPG (Remote handwheel) | Coolant system | Chip flushing sythem |
Halogen work light | Heat exchanger of electrical box | Chain type chip conveyor |
Leveling bolts, and blocks | Tool box for machine set up | 4th axis interface |
Beacon light | Transformer | |
Automatic power OFF (M30) | ||